Project Description

Carbon Molecular Sieve 

CAS NO.:1318-02-1

Appearance: Pellet

Standard Packaging: 20 KG/Plastic Drum , 40 KG/Plastic Drum

Delivery Time : 7-10 days

Quality Insurance: National Standard HG/T 4364-2012

20”GP Load : 10 Tons           40”GP Load: 20 Tons  (Palletized)

Inquiry

Carbon Molecular Sieves CMS

Nitrogen generation by Pressure Swing Adsorption (PSA) process is a technology used to separate nitrogen from a mixture of gases under pressure according to the special selective adsorption characteristics of the Carbon Molecular Sieves (CMS).

The Carbon molecular sieve is a material containing tiny pores of a precise and uniform size that is used as an adsorbent for gases. When the pressure is high enough, the oxygen molecules, which pass through the pores of CMS much faster than the nitrogen molecules, are adsorbed, while the coming out nitrogen molecules will be enriched in gas phase. The enriched oxygen air, adsorbed by the CMS, will be released by reducing the pressure. Then the CMS is regenerated and ready for another cycle of producing nitrogen enriched air.

Physical properties 

  • Diameter of the CMS granule: 1.8-2.1mm
  • Period of adsorption: 120S
  • Bulk density: 680-700g/L
  • Compressive strength: ≥ 95N/ granule

Service scope

The following merits of service:

  •  High ratio performance & price, reducing investment cost and operation cost.
  •  Large hardness, little ash, long service life, uniform particles which protests air current impact.
  • Stable quality: Testing strictly according to 100% standard of production and ex-factory testing management.
  • The resin uses in producing the high pure nitrogen with good performance which substitutes the similar import products.

PSA Nitrogen Generation Process

1) Air Feed System
The environmental air supplied to the PSA system should be compressed and purified to get rid of the dust, the oil and water.

2) PSA Nitrogen Generation System
While the compressed and purified air flows through the adsorbent bed with CMS inside in a bottom up way under the pressure of 0.6MPa, the oxygen molecules will be adsorbed by the solid surfaces of the CMS, and the enriched nitrogen will be output from the top of the bed to the container.

When the adsorbent bed reaches the end of its capacity to adsorb oxygen, it can be regenerated by reducing the pressure, thereby releasing the adsorbed oxygen. Using two adsorbent beds to absorb and regenerate in turn allows producing continuous nitrogen in cycle.

Model

Carbon Molecular Sieve
Shape

pellet

Diameter

1.2 mm or customized

Crushing strength Min(N/PC)

(The test temperature≤20℃)

50

Bulk density (G/L)

(The test temperature≤20℃)

660-700

Adsorbent time (S)

(The test temperature≤20℃)

2*60

Type

Adsorbent pressure (MPa)

N2 purity (%) Nquantity (M3/MT.HT)

N2/Air (%)

CMS-200

0.75-0.8

99 225 2.41

99.5

200

2.6

99.9

110

3.9

99.99

70

4.8

99.999

40

7.0

CMS-220

0.75-0.8

99

245

2.38

99.5

220

2.55

99.9

140

3.7

99.99

100

4.7

99.999

55

6.8

CMS-240

0.75-0.8

99

260

2.35

99.5

240

2.5

99.9

155

3.5

99.99

110

4.65

99.999

65

6.7

CMS-260

0.75-0.8

99

320

2.2

99.5

260

2.5

99.9

175

3.5

99.99

120

4.6

99.999

70

6.7

    Please feel free to give your inquiry in the form below.We will reply you in 24 hours.


    Please prove you are human by selecting the Car.